PYROspy®
Infrared early fire detection with 360° all-round viewing and targeted extinguishing
PYROspy® is an all-in-one infrared early fire detection system with innovative 360° all-round vision that extinguishes fires before they escalate into dangerous blazes.
Conventional fire alarm systems only detect fires at more advanced stages (e.g. with the presence of smoke/flames), but the PYROspy® series of infrared fire detectors can detect fires earlier. They “see” excessively hot material surface temperatures long before smoke or flames appear.
If a potential fire source is detected at an early stage, immediate measures can be taken, i.e., the targeted automatic cooling of a hotspot.
The aim is to detect potential fire sources, e.g., small lithium batteries, as soon as they begin to heat up. Higher spatial resolution in infrared monitoring, i.e., more detection points per square meter, means fire sources can be detected earlier.
Fixed infrared cameras for fire detection generally use lower spatial resolution to monitor large areas and therefore only trigger alarms much later.
Orglmeister early fire detection systems scan entire monitored areas quickly and periodically. The much higher spatial resolution means small fire sources such as defective batteries can be detected several minutes earlier. Scanning times are quick due to the high resolution.
A single camera system achieves very high radiometric spatial resolution. Fire hazards can then be detected and localized at an extremely early stage. This gives you time to take action against developing fires much sooner.
PYROspy® is therefore a clear winner when compared to fixed IR fire detection cameras.
The aim is to detect potential fire sources, e.g., small lithium batteries, as soon as they begin to heat up. Higher spatial resolution in infrared monitoring, i.e., more detection points per square meter, means fire sources can be detected earlier.
Fixed infrared cameras for fire detection generally use lower spatial resolution to monitor large areas and therefore only trigger alarms much later.
Orglmeister early fire detection systems scan entire monitored areas quickly and periodically. The much higher spatial resolution means small fire sources such as defective batteries can be detected several minutes earlier. Scanning times are quick due to the high resolution.
A single camera system achieves very high radiometric spatial resolution. Fire hazards can then be detected and localized at an extremely early stage. This gives you time to take action against developing fires much sooner.
PYROspy® is therefore a clear winner when compared to fixed IR fire detection cameras.
PYROspy® eco
Monitoring small depots
PYROspy® eco is mainly suited to monitoring small storage facilities. The maintenance-free rotation system has been tried and tested over many years and enables 360° monitoring in just 20 seconds.
- Cost-effective entry into IR early fire detection scanning.
- Equipped for operating fire monitors and water-mist turbines.
- 10-year warranty on mechanical parts / drive electronics.
High spatial resolution of immediate surroundings
PYROspy® eco enables 360° scans with a spatial resolution of almost 1 million measuring points, i.e., equivalent to multiple high-resolution fixed camera systems.
PYROspy® pro
Monitoring large areas
PYROspy® pro is ideal for monitoring large storage facilities. The maintenance-free, self-monitoring pan/tilt system has been tried and tested over many years and is designed for years of continuous operation. An integrated zoom video camera together with a high-resolution IR autofocus camera enables very small and distant objects to be detected. PYROspy® pro is therefore ideal for detecting and extinguishing very small and distant fire sources, such as lithium-ion batteries, with pinpoint accuracy. This is the best way to instantly prevent potential fire sources from escalating into blazes.
- VdS-certified – insurance company approved.
- Smart detection to avoid false alarms, e.g., from hot exhausts.
- Video camera for extended detection functions.
- Smart detection of sun reflection to enable outdoor use.
- Smart control of fire extinguishing monitors to prevent fires using minimal extinguishing agent.
- 10-year warranty on mechanical parts / drive electronics.
Maximum spatial resolution using a single camera system
The patented abiroVision software guarantees seamless 360° all-round viewing of the fire-monitored area using 10.3 million measuring points. This is equivalent to dozens of fixed camera systems!
Scanning the entire area with the PYROspy® pro generally takes around one minute. Ten to 30 minutes are generally required for defective small lithium batteries to heat up and become fire sources.
Experience and AI prevent false alarms
PYROspy® is based on 30 years of experience in applied infrared technology and early fire detection.
Our patented abiroVision software uses a range of features and intelligent, secure algorithms to detect and exclude non-hazardous hotspots with a high degree of reliability. Alarms are then only triggered if there is a real reason for them.
Get in contact
Everything in view with the patented 360° “Thermo Radar”
The patented PYROspy® infrared detection method enables thermal monitoring of buildings, warehouses and outdoor areas.
Like a radar, PYROspy® continuously scans heat patterns in radii of up to 23 m (PYROspy® eco) or 115 m (PYROspy® pro). The range complies with the VdS standard.
If critical temperatures are detected, the system triggers an alarm, records all data related to the incident, initiates extinguishing procedures, notifies the fire services and continuously informs designated persons about the alarm status using live images.
Seeing more with autofocus, live video and 14x optical zoom
To detect fire sources as early as possible, PYROspy® pro analyses both thermal and video images simultaneously. PYROspy® pro is equipped with an integrated infrared camera with autofocus making it ideal for monitoring objects with fluctuating viewing distances (e.g. recycling centers, bulk goods warehouses with varying fill levels and large open-air warehouses).
Fire detection, alarm signaling to the fire alarm control panel (FACP) and extinguishing via different extinguishing systems is fully-automated.
A manual operating mode is also available for detailed viewing of a location and initiating fire prevention measures before a fire alarm is triggered. One click on the operating terminal moves the powerful 14x video zoom camera together with the IR camera to the required position, displays the current thermal and video image, and assesses the location for potential fire sources.
Targeted extinguishing
Automatically operated by PYROspy®
When it‘s clear that a fire is about to start, preventive measures – cooling down the hotspot – should be taken immediately.
This is the philosophy behind PYROspy®. The time gained between detecting a hotspot and a fire breaking out can be used for direct and targeted cooling and/or the deployment of extinguishing systems. Targeted extinguishing leaves unaffected areas untouched and ensures that operations can continue.
A promptly cooled („extinguished“) hotspot is the best protection against fires. Automatically extinguishing a possible source of fire in a targeted manner places high demands on technology. Orglmeister has years of experience in automatic extinguishing systems. In the event of an alarm, the smart PYROspy® extinguishing software controls targeted extinguishing using standard fire monitors – fully automatically with dynamic adaptation to actual circumstances.
Get in contact
PYROspy® and PYROsmart® – How do they differ?
PYROspy® pro is used for 360° viewing around the mounting point and is ideal for low spaces.
The monitoring area is displayed as a circular panoramic image.
PYROsmart® pro primarily monitors the center axis below the mounting point and is therefore ideal for deep spaces such as waste bunkers, but also for any type of warehouse and open space.
The monitoring area is displayed as a standard panoramic image.